PERI UP Flex Trappentoren 75

The lightweight stair tower for flexible access solutions
Height adjustments to building openings are carried out by means of short flights of stairs and externally mounted brackets – regardless of the floor height.
PERI UP Flex Stair Alu 75: Stair tower with twin staircase units for the construction of a liquid gas tank. Guardrails mounted on the outer and middle stringers provide safe passage.
PERI UP Flex Stair Alu 75: Short flights of stairs with 75 cm widths offer maximum adaptability also for small areas and narrow geometries.
PERI UP Flex Stair Alu 75: Exit stairs enable to reach every floor level.

Overview

The lightweight aluminium flights of stairs with 75 cm widths are mounted on ledgers of the PERI UP modular scaffolding. This results in 4-legged stair towers with alternating staircase units or staircase units in the same direction with heights of up to 100 m. The PERI UP Flex Stair 75 is designed to accommodate 2.00 kN/m² loads and serves as access to working areas or construction sites. 

Flexible assembly 
Through the 25 cm grid dimension, all bays can be completely closed even in the smallest of spaces 

Easily adapted 
for accessing building openings with brackets and small flights of stairs – regardless of storey heights

Fast installation 
with only a minimum number of ledgers and anchors


Technical Details

  • Quickly assembled, welded flights of stairs with 75 cm widths (clear stair width 67 cm)
  • Can be used for alternating staircase units or staircase units in the same direction with assembly heights from 2.00 m up to 66.00 m (project-specific planning up to approx. 100 m assembly height)
  • Ground plan: 1.50 m x 2.50 m or 1.50 m x 3.00 m
  • Permissible loads: 2.00 kN/m² for flights of stairs and 2.00 kN/m² for the entire construction for a run of staircase and landing of 20 m
  • Adaptation for accessing building openings in height increments of 25 cm by means of laterally-mounted brackets
  • Flights of stairs can also be installed next to each other with movements in both directions as well as centrally attached guardrails

Version for narrow spaces

Stairwell Stairs

With the stairwell staircases, compact access means can be provided on the inside of buildings with small staircase wells. For this, shorter ledgers are connected at the same height at 90° angles while using flights of stairs with smaller run lengths and heights. At the same time, the stairwell staircases serve as working platforms for carrying out further work on the sides of the walls. With standard components, access can be created to all floors in height increments of 25 cm.